What golf clubs does PGA Tour star and seven-time European Tour winner Matt Fitzpatrick use?
Matt Fitzpatrick is one of an ever increasing group of players who enjoys almost-complete freedom when it comes to choosing his golf clubs, with only his putter part of a contracted deal.
The Englishman is contracted to Bettinardi having used the brand’s DASS BB1 Flow Tour Dept. putter with a custom face milling with great success throughout the 2020 PGA Tour season, finishing second in the Strokes Gained: Putting stat.
The 27-year-old, who enjoyed a stellar amateur career before turning pro in 2014, has used Ping irons throughout his career at the highest level and also remains loyal to the Titleist Pro V1x ball with which he’s enjoyed vast success.
RELATED: Which Ping iron is right for me?
While 13 of the Ryder Cup star’s 14 golf clubs completely down to him, in March 2022 he signed a clothing deal with British company Castore, having previously been with Under Armour, and a couple of months earlier signed a multi-year agreement with Skechers to wear their Go Golf shoes.
Let’s take a closer look at what’s in the bag of Matthew Fitzpatrick. And, if you’re in the market for some new gear, find out how all of his clubs performed in our tests of 2022’s best equipment.
RELATED: Best Drivers
RELATED: Best Irons
RELATED: The best golf ball for your game
Glove and Apparel
RELATED: Best Golf Shoes
How did Bettinardi and Matt Fitzpatrick first meet and start working together?
The relationship started in 2016, we have a mutual friend who like Matt was an alumni of Northwestern University in Chicago. I knew they’d played a lot of golf together so I asked for a mutual introduction. He was like there’s no way Matt is ever going to change his putter, he’s been using his Yes Tracy II since he was 16 years old.
I said we should try, Matt is an equipment free agent he’s a player who’s not trapped by a big OEM contract. We got along well and started working together not long after. We made a few initial putters, Matt wanted a few adjustments, but it wasn’t until 2018 that Matt first put a Bettinardi putter in play. He went back to his Yes in 2019, so it’s been a 5-year process before we signed him to team Bettinardi in 2021.
Five years is a long time, how many different putters did you make Matt over that period? And how different were they?
We made 25 – 30 different putters for him. Each has very minor changes as Matt is very discriminate. The types of things his eyes see and what he looks for in a putter would never be spotted by a lot of tour players, let alone club golfers. Matt notices everything, our team had to step it up to get him a putter he was happy with.
Part of the 25 – 30 putters we made was him trying our Bettinardi face milling patterns which can alter roll, feel and sound. But he likes the sense of using what he knows, so he kept going back to what he’s used for a lot of his life, the C-Groove technology on his Yes putter. Matt’s really particular about the how the topline of the putter is polished so it has a nice silver colour, and the putter body absolutely has to be black.
Give us an idea of the amount of time Bettinardi have invested in Matt.
Starting from scratch like this and making a complete custom putter from head shape all the way through to a personal face milling pattern is not a quick process at all. It started with Matt and I having a conversation. I took Matt’s requirements over to our engineers and we 3D printed the first head. Once Matt had signed off on that we went ahead and machined the first head, then it needed polishing, finishing and assembling.
Each additional putter sample then involves tweaking CAD file’s to produce a slightly different head, we went through this process 25 – 30 times to finally come up with one putter that Matt was happy with and wanted to put into play. Don’t forget he’s a top 20 player in the world and one of the games very best putters. Now we’ve got there with him we’ve run off a number of his heads as raw back-ups which gives us some wiggle room.
What did Matt like about the Bettinardi DASS BB1 Flow Tour Dept model that he’s put into play? Why did he choose that particular one?
A lot of it was getting the feel that he wanted off the face. Thanks to the Yes C-Groove patent having expired we could create our own C-Groove pattern. We improved on the groove shaping (our faces are milled so we can very closely control every dimension), which gave Matt the perfect set up but with the safety of generating a familiar look and cosmetics and the predictable results that he’s accustomed too. Nailing the offset was absolutely key too, but nothing on tour stands still so we’re still talking about offset.
Offset (the distance between the leading edge and the hosel) is really personal on a putter and Matt’s eyes analyse it really closely. Matt’s putter is a flow neck model so there’s no straight edges or angles leading into the head of the putter. Where some players like seeing ¾ of a shaft width of hosel offset others prefer an 8th, Matt likes a 6th, which gives the perfect look and suits his hand position and putting style.
The headweight of the putter also has to be exact. Our production putters have a tolerance of +/-1g, so if the head weight is 362g customers get a putter at either 361g, 362g or 363g. Matt’s putters have to be exact and he likes his putters to be 346g, so they have to be 346g, and the swingweight needs to be spot on too. We can do that here at Bettinardi as everything is milled inhouse in the USA and our quality control standards are second to none. We knew we’d nailed it when Matt won the 2020 DP World Tour Championship in Dubai on his first week out with his DASS BB1 Flow putter.
Why do you think Matt was so attached to the Yes Tracy putter?
It was a familiarity thing, having used it since he was 16 years old he knew the shape and feel inside out. When we approached him about working with us, he was buying Yes Tracy putters from eBay as back-ups. The brand wasn’t about anymore so it was his only option.
A few years ago he came up to see our facility in Chicago and I think he liked how he could have anything he wanted. It didn’t matter if he drew something on a napkin, or if he had a particular design in his mind, he realised we could make it for him. He enjoyed learning about what we could do milling wise and understanding that anything was possible, in my mind it’s what made the relationship.
I think we were Matt’s security blanket, he wanted to try something new and feel safe in the knowledge that we could create the C-Groove for him, but also produce exact back-ups so he could experiment along the way, that’s a service he just couldn’t get from Yes anymore.
I give some credit to Yes in the way they developed their technology, it wasn’t easy to replicate. We make putters for Fred Couples, Matt Kuchar and Jason Kokrak and what we’ve learned from working on creating Matt’s C-Groove design is that by removing face material (like we do on our FIT and Roll Control putter faces) you get a softer feel, but it’s actually a whole lot more than that.
The specific angle that grooves are cut at really affects feel, roll and sound. It took a lot of reverse engineering to realise the feel, roll and sound expectations that Matt had become accustomed to with the Yes putter.
I see comments on social media asking if Bettinardi will bring back the C-Groove but our Roll Control Face is very similar in terms of performance.
Where do you spend most of your test time with Matt? In the Bettinardi putting lab (Studio B) or out on tour?
We’ve had him in Studio B a couple of times, but we also have PGA and European Tour Reps that spend time with him constantly. We use Quintic analysis software and it’s just silly how good his putting numbers are. Time after time, the consistency of how he repeats the ball coming off the putter face and starts it rolling is ridiculously good.
My fathers been making putters for some of the best players in the world since 1991, I’ve been involved in the putter world all my life and Matt is one of the few players who’ll pick up on the tiniest of subtleties, players like this usually tend to be the best putters.
We worked with Francesco Molinari when he had the best year of his life in 2018 (winning twice on tour including The Open, plus a dominant performance in the Ryder Cup), we’ve made putters for Fred Couples, Matt Kuchar, Jim Furyk and Vijay Singh all of whom are major winners. Matt is knocking on that door too, but in terms of how discriminate he is he’s top calibre.
How long does it take to make Matt a new putter? And does he travel with back-up models?
If we’re starting from one of the back-up blanks we’ve previously created for Matt we can turn something around in 3 -5 days. But if we run out of those heads we’re talking 5 – 10 days. We’re just in the process of running him up a new back-up for the Ryder Cup.
Matt travels with a DASS BB1 Flow Tour Dept putter at both 2.5° and 3.5° of loft. Depending on the conditions of the greens he’ll switch and swap the lofts instead of having our tour rep bend the loft each week. Matt likes to have the exact loft milled into each face so all the other dimensions of the head remain constant.
At Whistling Straits at the Ryder Cup where the greens are likely to be fast he’ll use the 2.5° loft, where if he’s playing out on the west coast at Pebble Beach or Riviera he’ll go with the higher loft because of the Poa annua greens.
A lot of Bettinardi Tour Dept putters are made from DASS (Double Aged Stainless Steel), what is DASS and what does it do?
As we mill all of our own putters in our own facility we like to use the very best materials, especially when it comes to the best players in the world. In order to get a little bit softer feel we send our 303 stainless steel to a heat treatment company. They heat the metal up to 600°F before pulling it out of the oven and letting it cool. The metal’s heated again to 450°F before being left to cool a second time. What we’re doing is annealing the steel, aging it twice, so it’s softer for machining but also gives a softer feel playability wise too.
Think of it like aging a wine. We’ve been doing it for 15 years and some of our players have loved the feel because it’s second to none.
Finally, what it does mean to have a player like Matt playing Bettinardi? And we’ve heard you have an interesting story about his putter grip?
Every day it seems new putter companies pop up because somebody has a milling machine and they feel they can make putters. Not everyone has tour players though, and not everyone has tour and major victories under their belt. Matt is a top 20 player in the world so it’s immediate validation. When you buy Bettinardi you’re buying into a company that has 23 years experience of milling putters under their own name (and an additional 7 years of producing for others), and we’ve racked up over 90 worldwide tour victories in that time. It’s been a great relationship stretching back to 2016, we’ve worked really hard to keep Matt happy, it’s been fun.
Matt’s used a Winn AVS grip for quite some time (we usually use Lamkin putter grips), so when he joined team Bettinardi we wanted to give him exactly what he was familiar with. Matt likes a rugged, worn feel to his putter grip, so when we put a new grip on his putter we’ll take a knife blade and some sandpaper and rough it up so it has the feel of a worn out grip. He switched to the Bettinardi Winn grip right after the Masters this year and he’s used it religiously since.
Visit the Bettinardi website here
ABOUT THE AUTHORS
Rob Jerram is the Digital Editor of
He has been a journalist for more than 20 years, starting his career with Johnston Press where he covered local and regional news and sport in a variety of editorial roles across ten years.
Rob joined Bauer Media in 2010 and worked as the Senior Production Editor of Today’s Golfer and Golf World magazines for ten years before moving into the Digital Editor’s role in July 2020.
He has been playing golf for almost three decades and has been a member at Greetham Valleyin Rutland for eight years, playing off a 12 handicap.
You can contact Rob here.
Simon Daddow is the Equipment Editor at
Simon has worked in the golf industry for 30 years. Starting out as trainee professional at Downes Crediton GC where he learned the art of golf club making, before going onto work for Clubhaus Plc and Tony Charles Ltd as a golf club maker, and running Product Development at Benross Golf.
Joining EMAP Active (now Bauer Media) in 2006 as Equipment Editor Simon has worked for Today’s Golfer and Golf World magazines and the Today’s Golfer website.
Simon has played golf for 40 years and plays to a handicap of 10. A lack of club speed means he’s short off the tee, but very handy from 125 yards and in.
You can contact Simon here.